|Pneumatic nailer are designed to be operated with a 2.8 lbs mallet.
Use ONLY the rubber end of the mallet to actuate the tool.
The use of the steel end will damage the head assembly and will VOID the warranty.
|Pneumatic tools require minimal lubrication.
Few drops of oil weekly in the air inlet is sufficient to reduce wear and prolong life.
|Troubleshoot your compressed air delivery system.
Many of problems come from a faulty or inadequate compressed air supply system.
Read this section before attempting to repair the tool.
Contact Technical Support at (800) 363‑1962 or firstname.lastname@example.org
Return to Technical Support home or www.primatech.ca
© Copyright 1996-2020 Primatech. All rights reserved. Disclaimer.