Q900 - Replacement Parts

Replacement parts & kits for all configurations are listed below.
Always refer to the schematic specific to your tool version before ordering parts.

IMPORTANT

NEVER apply thread-locker or sealant onto head, cylinder or main body threads.
The use of thread locker will VOID the warranty.

Use only specialty 1¾" edge nails.
The use of standard 18ga nails will damage your floor and cause deviation of the nail
toward the front ledge of the board, making it impossible to properl fit the following row.

Part #	Description	Notes
A-800E	Handle grip	For edge handle extension A-800F.
A-800F	Edge handle extension
H-055	Pusher assembly	For nail magazine Q-048.
H-083A	Mallet grip
H-084	Head cap (for all mallets)	See Installation instructions. Also available in Display Kit of 8 (ask for H-984).
P-080	Mallet
P-254	Handle grip	For body handle.
P-616D	Head lock
Q-001	Head cap
Q-001A	Head disk	Not sold separately; order Q-001.
Q-006A	o-ring
Q-018A	Band-valve
Q-022L	Piston	Not sold separately; order Q-993E.
Q-022A	Wear ring	See Note.
Q-022B	o-ring	Not sold separately; order Q-022A.
Q-025B	Seal bushing
Q-036	Cam axle	Not sold separately; order complete kit Q-936.
Q-036A	Left cam	Not sold separately; order Q-936.
Q-036B	Right cam	Not sold separately; order Q-936.
Q-042A	Seal
Q-048E	"EDGE" nail magazine
Q-106	Head body	NEVER apply thread-locker or sealant onto head, cylinder or main body threads.
Q-116E	Main body	NEVER apply thread-locker or sealant onto head, cylinder or main body threads.
Q-118	Main cylinder
Q-118B	o-ring
Q-118C	o-ring
Q-118D	o-ring
Q-125A	Bumper
Q-143V	Valve assembly	Complete valve assembly including actuator. Do not attempt to disassemble. See Technical Note.
Q-623	Blade	See instruction
Q-629	Foot
Q-632	Gate
Q-633	Base
Q-633B	Pad for base
Q-635A	Left bracket	Q-635E(1x) and Q-635F(1x) included
Q-635B	Right bracket	Q-635E(1x) and Q-635F(1x) included
Q-635C	Bumper (old)	Discontinued, order Q-635E (new version)
Q-635E	Bumper (new)	2 units / pkg. See Technical Note.

Parts kits