Technical Note

P245 Stapler Magazine

The old-style P‑153 magazine was upgraded on P245 staplers and replaced with the new P‑253S magazine.

  • All P245 staplers with Serial Number starting with "358000" or above are fitted with the new P‑253S magazine.
  • To replace an old-style magazine P‑153, order the new magazine P‑253S and foot/gate plates P‑429 & P‑639A.
  • The P‑253S magazine is not compatible with tools P250A or P250F.

P250A & P250F Staplers Magazine

The P‑153 magazine was upgraded on P250A & P250F staplers and replaced with the new P‑253A magazine. This new magazine features the LoadXtend (patent pending) mecanism allowing to feed more strips and to reload extra strips on the fly.

  • All P250A staplers with Serial Number of "350400" or above and P250F staplers with Serial Number of "357100" or above, are fitted with the new P‑253A magazine.
  • To replace an old-style magazine P‑153, order Upgrade Kit P‑253U which includes the new magazine P‑253A along with plates P‑429 & P‑639A. Consult Parts Kit section for more information.
  • The P‑253A magazine can take the Elbow extension P‑252. This extension brings the capacity of the magazine to 6 strips of staples. The P‑252 extension is standard on Gym‑Edition P250ASG staplers.

See also Troubleshooting LoadXtend magazine.

P250A Gym‑Edition Elbow Magazine

The Elbow extension P‑252 can be attached to any P‑253A LoadXtend magazine. This feature is standard on P250ASG staples.

Always check the schematics below before ordering replacement parts.


P‑153 old-style stapler magazine



P‑253S new magazine for P245 stapler

Upgrade kit P‑253U with P‑253A LoadXtend magazine for P250A & P250F staplers

Upgrade kit P‑252U with P‑252K LoadXtend magazine (including L-Bow extention P‑252 and P‑253A magazine)
(This configuration is standard on P250ASG Gym‑Edition)

________________
Contact Technical Support at (800) 363‑1962 or support@primatech.ca
Return to Technical Support home or www.primatech.ca
© Copyright 1996-2019 Primatech. All rights reserved. Disclaimer.