Online Technical Data

The QR Code found on the tool can be scanned to retrieve all documentation relative to specific tool.

Alternatively, the URL listed around the QR Code can be entered in any web browser:  using the code on your tool.

Enter the QR Code applied on the tool:  

You will find the Operation Manual, Part list and Schematic referring to your tool as it was manufactured. You will also find useful information for ordering replacement parts.

Latest versions

Use these links if the tool is not identified with a QR Code. You will be redirected to the last version of the tool, which may differ with your tool.

Other products

Other documentation

Pneumatic nailer are designed to be operated with a 2.8 lbs mallet.
Use ONLY the rubber end of the mallet to actuate the tool.
The use of the steel end will damage the head assembly and will VOID the warranty.
Pneumatic tools require minimal lubrication.
Few drops of oil weekly in the air inlet is sufficient to reduce wear and prolong life.
Troubleshoot your compressed air delivery system.
Many of problems come from a faulty or inadequate compressed air supply system.
Read this section before attempting to repair the tool.


Contact Technical Support

(800) 363-1962
(418) 522-7466

© Copyright 1996-2014 Primatech. All rights reserved. Disclaimer.